Table of Contents
Advertisement
For actions using the keypad, the term press is used instead of tap. Tap is used when
working on the touchscreen.
Switching the device on and off
To switch on:
Press and hold down the key for a few seconds.
The device switches on.
The device performs a self test during the boot up process. The results are displayed on the
screen. The device starts with the last used settings.
To switch off:
Press and hold down the key for a few seconds.
The device switches off.
To force shutdown:
Press and hold down the key for at least 10 seconds to switch off the device immediately
without shutting down the operating system properly.
Operating the screen
The SignalShark 3310 Handheld provides a resistive touchscreen allowing an easy and fast
access.
The SignalShark 3320 Remote Unit can be operated by an additional touch screen (USB and
Display Port) or via Remote Desktop.
Gestures
The following types of gestures can be used on the touchscreen screen of the device menu.
• Click: Click once.
• Double click: Click briefly twice.
Locking the touchscreen
Press the Stealth/Touch key for > 2 s to lock the touchscreen or select the function from the
dropdown menu.
Press the Stealth/Touch key again for > 2 s to unlock it or select the function from the
dropdown menu.
Button bar
The Button bar is your main access to change measurement settings, to configure the
current active view and to adapt the display settings to your needs. The Button bar is
context sensitive. Thus, the available buttons depend on the active view.
Basic Operation
49
Advertisement
Table of Contents
