L3Harris Narda SignalShark User Manual page 101

Tone Search Det.
Here you can change the Tone Search Det. value:
1. Tap the Display and Tone button.
The menu opens.
2. Tap the Tone Search Det. button.
3. Select the required value from the dropdown list.
4. Press the Esc key twice to close the dropdown list and the menu.
Tone
Here you can switch the tone on or off:
1. Tap the Display and Tone button.
The menu opens.
2. Tap the Tone button to set the tone on or off.
Tone Volume
Here you can set the tone volume and select mute for the tone search function.
To set the tone volume:
1. Tap the Display and Tone button.
2. Tap the Tone Volume button.
3. Enter the required value and confirm with OK.
4. Press the Esc key to close the menu.
To select the tone mute function:
1. Tap the Display and Tone button.
2. Tap the Tone Mute button to switch the function On or Off.
3. Press the Esc key to close the menu.
Equalizer
The Equalizer button allows you to switch the equalizer on or off. The equalizer adapts the
volume according to the tone search tone frequency to get a better sound experience.
1. Tap the Display and Tone button.
The menu opens.
2. Tap the Equalizer button to set the function On or Off.
Mod. Detectors Scaling
Here you can change the Mod. Detectors Scaling values:
1. Tap the Display and Tone button.
The menu opens.
2. Tap the Mod. Detectors Scaling button.
3. Enter the required values and units by tapping the corresponding button:
AM Max
AM Range
FM Max
FM Range
PM Max
PM Range
Default Range
4. Press the Esc key to close the menu.
Level Meter View
101