Current Position
If set to On, your current position is displayed in the map.
Tap to switch On or Off.
Current Direction
Select how your current direction is displayed in the map.
• Off: Current direction is not displayed
• Handle Azimuth: Current direction shows handle azimuth (antenna handle must be
mounted).
• ADFA Bearing: Current direction shows latest ADFA bearing.
• Velocity Direction: Current direction shows direction of movement (ADFA must be
mounted on a vehicle and vehicle must be moving).
To select the current direction type:
Tap the Current Direction button.
Bearing Lines
Tap the button and select a bearing line type from the dropdown menu:
– Arrow: The bearing is displayed as an arrow.
– Short: The bearing is displayed as a short line.
– Infinite: The bearing is displayed as a infinite line.
Last Bearing
Tap button to show or hide last bearing (toggle function).
Loc. Result
Tap button to show or hide Ftune and coordinates of last localization on top of the map view
(toggle function).
min. Probability
This button allows to set the probability a bearing must reach at least to be displayed in the
map.
• 0 = 0 %
• 1 = 100 %
To set min. Probability:
1. Tap the min. Probability button and turn the Rotary knob or enter a value.
When displaying bearings in the Map view turning the Rotary knob has an direct effect
on the presentation of the bearing beams.
2. Press the Rotary knob or tap the OK button.
Map View
197