Table of Contents
Advertisement
SignalShark User Manual
SRun button.
Tap to start a single measurement run according to the Scan Count parameter.
Marker button.
Tap to open the Marker menu.
Menu button.
Tap to open a dropdown window with following functions:
• volume controls
• configure view button
• load default setup button
• help button
Button bar
The Button bar is your main access to change measurement settings, to configure the
current active view and to adapt the display settings to your needs. The Button bar is
context sensitive. Thus, the available buttons depend on the active view.
The title of the main menu is displayed on top of the Button bar.
When you have opened a submenu, tap the title of that menu to get back to the main menu.
Buttons in the button bar
The buttons show a submenu when tapped. Some buttons even may have several
submenus.
To close the submenus, tap the header of the Button bar or press the Esc key until Main is
displayed.
Measurement info bar
The measurement info bar on the bottom of the screen gives information about the current
measurement depending on the selected view. The contents of the display may vary,
depending on the operating mode.
Measurement settings
The displayed parameters depend on the selected application.
64
Advertisement
Table of Contents
