Dentsply Sirona Orthophos E Ceph Operating Instructions Manual page 48

5 Operation
5.1 Acquiring the X-ray image
A
B
48
5.1.2.1.6.1 Positioning with chin rest and rod for bite block
ü The chin rest and bite block segment, as well forehead support and
temple supports are inserted in the unit.
ü The relevant hygienic protective sleeves are pulled over the
accessories.
1. Guide the patient in front of the control mirror.
2. Set the unit height using the up (A) and down (B) keys. CAUTION!
The height adjustment motor starts slowly and then increases its
speed. Press and hold the key until the desired height is reached.
The motor movement is accompanied by an acoustic signal.
Ä The patient's chin and the chin rest on the unit are at the same
height.
3. Turn the bite block away from the patient.
Ä The bite block is pointing towards the control mirror.
4. Instruct the patient to place his chin on the chin rest and place both
hands on the hand grips.
5. Turn the bite block towards the patient and instruct him to bite on
the bite block.
Ä The patient's anterior teeth are positioned in the indentation in
the bite block. If necessary, push the lower anterior teeth
forwards until they reach a stop.
Dentsply Sirona
Operating Instructions Orthophos E
67 11 001 D3352
D3352.201.12.01.02 03.2019