Dismantling And Disposal; Dismantling And Reinstallation; Disposal - Dentsply Sirona Orthophos E Ceph Operating Instructions Manual

9 Dismantling and disposal

9.1 Dismantling and reinstallation

110
9
Dismantling and disposal
IMPORTANT
Please export all test reports that require safekeeping before
dismantling the device.
Dismantling and reinstallation
9.1
When dismantling and reassembling the unit, proceed according to the
installation instructions for new installation in order to guarantee its
functioning and stability.
The X-ray unit must be recalibrated whenever structural alterations in
the area surrounding the X-ray room or new installations have been
performed.

Disposal

9.2
Please observe the notices in the chapter "Important information for
repacking and transport".
In accordance with Directive 2012/19/EU and national disposal
regulations regarding old electrical and electronic devices, please be
advised that such items must be disposed of in a special way within the
European Union (EU). These regulations require the environmentally
friendly recycling/disposal of old electrical and electronic devices. Such
items must not be disposed of as domestic refuse. This has been
expressed, among other methods, using the icon of the 'crossed out
trash can' since 03.24.2006.
Disposal procedure
We feel responsible for our products from the first idea to their disposal.
For this reason, we give you an option to return our old electronic and
electrical devices.
If you wish to dispose of your devices, please proceed as follows:
In Germany
To initiate return of the electrical device, please send a disposal request
to enretec GmbH. You have the following options here:
● Use the 'Returning an electrical device' button under the 'eom' menu
item on the enretec GmbH homepage (www.enretec.de).
● Alternatively, you can also contact enretec GmbH directly.
enretec GmbH
Kanalstraße 17
16727 Velten
Phone: +49 3304 3919-500
E-Mail: eom@enretec.de
In accordance with the national disposal regulations regarding old
electrical and electronic devices (ElektroG), as the manufacturer, we
assume the costs for disposing of the electrical and electronic devices
in question. Disassembly, transport, and packaging costs shall be borne
by the owner/operator.
Dentsply Sirona
Operating Instructions Orthophos E
67 11 001 D3352
D3352.201.12.01.02 03.2019