Technical Data; Unit Data - Dentsply Sirona Orthophos E Ceph Operating Instructions Manual

3 Unit description

3.2 Technical data

18
Technical data
3.2
3.2.1

Unit data

Model name:
Nominal voltage:
Permissible fluctuation:
Permissible drop under
load:
Rated current:
Nominal power output:
Nominal frequency:
Mains resistance:
Main building fuse:
Power consumption:
Power output of tube as-
sembly:
Tube voltage:
Tube current:
Maximum setting range:
High-voltage waveform:
High voltage generation fre-
quency:
Program duration:
Exposure time:
Image acquisition scale:
Exposure time for a
cephalometric image:
Image acquisition scale for
a cephalometric image:
Total filtration of X-ray tube
assembly:
Focal spot size as specified
in IEC 60336, measured in
the central X-ray beam:
Operating Instructions Orthophos E
Orthophos E / Ceph
200 – 240 V
± 10%
10%
12 A
2 kW at 90 kV/12 mA with any radiation
time
50 Hz / 60 Hz
max. 0.8 ohms
25 A slow-blow (16 A for single line)
2 kVA
90 kV/12 mA = 1080 W with any radia-
tion time
60 – 90 kV (for 90 kV max. 12 mA)
3 – 16 kV (for 16 mA max. 66 kV)
60 kV / 3 mA to 90 kV / 12 mA
High-frequency multipulse
Residual ripple ≤ 4 kV
40 – 120 kHz
see "Program values" [→ 100]
see "Program values" [→ 100]
For P1, normal dental arch (slice cen-
ter) approx. 1:1.19, i.e. the acquired im-
age is magnified by approx. 19% on av-
erage compared to reality.
14.9 s max.
approx. 1:1.1, i.e. the acquired image is
magnified by approx. 10% on average
compared to reality.
> 2.5 AI / 90 IEC 60522
0.5 mm
D3352.201.12.01.02 03.2019
Dentsply Sirona
67 11 001 D3352