Table of Contents
Advertisement
2 Safety instructions
2.8 Emergency Stop
12
Emergency Stop
2.8
If any parts of the unit touch the patient during the rotary movement, let
go of the exposure release button (X-Ray) immediately or stop the unit
at once by actuating the unit main switch or an Emergency Stop switch
(not included in the scope of supply)!
Laser light localizer
2.9
The system incorporates Class 1 laser products.
The light localizers are intended for correct patient positioning. They
must not be used for any other purposes.
A minimum distance of 10 cm (4") is required between the eye and the
laser. Do not stare directly into the laser beam.
Make sure that the laser beam does not meet the eyes of the patient.
Prior to activating the light localizers, the patient must be asked to shut
their eyes.
The light localizers may be switched on only when functioning perfectly.
Repair work must be carried out by authorized staff only.
Do not use the system with any other lasers, and do not make any
changes to settings or processes that are not described in these
operating instructions. This may lead to a dangerous exposure to
radiation.
Hygiene
2.10
The protective sleeves must be reapplied for each patient, all auxiliary
exposure tools must also be disinfected to avoid potential transmission
of pathogens that may cause serious illnesses.
Application components without disposable protective covers must be
disinfected prior to patient positioning in order to prevent cross-
contamination.
Suitable hygienic measures must be taken to prevent cross
contamination between patients, users, and other persons.
The following chapters contain more information about sterilization and
hygienic protective sleeves: "Hygienic protective sleeves [→ 31]",
"Preparing the exposure", "Sterilization [→ 92]".
Dentsply Sirona
Operating Instructions Orthophos E
67 11 001 D3352
D3352.201.12.01.02 03.2019
Hide quick links:
Advertisement
Table of Contents
