Technical Data - Dentsply Sirona inFire HTC speed Operating Instructions Manual

Dentsply Sirona
Operating Instructions inFire HTC speed
Model designation:
Type of protection against electric shock:
Degree of protection against ingress of water:
Setup location:
Height
Temperature range:
Relative humidity
Overvoltage category:
Pollution degree:
Mode of operation
Dimensions of unit (W x H x D in mm):
Dimensions of packaged unit (W x H x D in mm):
Furnace chamber:
Maximum sintering temperature:
Approx. weight without packaging:
Approx. weight including packaging:
Maximum inlet pressure:
(applies to all devices with built-in gas management
module)
Rated line voltage
(all units except REF: 6401462 and 6416247):
Rated line frequency
(all units except REF: 6401462 and 6416247):
Rated current consumption
(all units except REF: 6401462 and 6416247):
Rated line voltage:
Rated power frequency:
Rated current consumption:
Maximum inlet pressure:
61 30 459 D 3497
D 3497.201.01.19.02 09.2017
4.4

Technical data

inFire HTC speed
Protection Class I device
Ordinary device (without protection against ingress of
water)
Indoors in dry area
up to 2000 m
5 °C to 40 °C (41 °F to 104 °F)
80% up to 31 °C (87.8 °F), above this decreasing linearly
to 50% at 40 °C (104 °F), no condensation
II
2
Continuous operation
500 x 820 x 565
630 x 1300 x 730
Diameter 130 mm x 80 mm height
1,650 °C (3,002 °F)
80 kg
96 kg
8 bar
200 V AC – 240 V AC
50/60Hz
15 A
Only for REF: 6401462 and 6416247
220 VAC – 230 VAC
50/60Hz
13A
10 bar
(applies to all devices with built-in gas management
module)
4 Technical description
4.4 Technical data
13