Safety; Safety Symbols; Danger And Warnings - Danfoss VACON 100 INDUSTRIAL Operating Manual

Operating Guide | VACON® 100 Wall-mounted Drives

2 Safety

2.1 Safety Symbols

The following symbols are used in this manual:
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
Indicates information considered important, but not hazard-related (for example, messages relating to property damage).

2.2 Danger and Warnings

SHOCK HAZARD FROM POWER UNIT COMPONENTS
The power unit components are live when the drive is connected to mains. A contact with this voltage can lead to death or
serious injury.
Do not touch the components of the power unit when the drive is connected to mains. Before connecting the drive to
-
mains, make sure that the covers of the drive are closed.
SHOCK HAZARD FROM TERMINALS
The motor terminals U, V, W, the brake resistor terminals, or the DC terminals are live when the drive is connected to mains, also
when the motor does not operate. A contact with this voltage can lead to death or serious injury.
Do not touch the motor terminals U, V, W, the brake resistor terminals, or the DC terminals when the drive is connected to
-
mains. Before connecting the drive to mains, make sure that the covers of the drive are closed.
Danfoss A/S © 2019.05
D A N G E R
W A R N I N G
C A U T I O N
N O T I C E
D A N G E R
D A N G E R
AQ298036140958en-000101 / DPD01711| 9
Safety