Table of Contents
Advertisement
Operating Guide | VACON® 100 Wall-mounted Drives
A
B
I
H
G
A The [BACK/RESET] button. Use it to move back in the menu,
exit the Edit mode, reset a fault.
C The [FUNCT] button. Use it to change the rotation direction
of the motor, access the control page, and change the
control place.
E The START button.
G The STOP button.
I The [OK] button. Use it to go into an active level or item, or to
accept a selection.
Illustration 45:
Buttons of the VACON
7.9.2 Displays of the Control Panel
There are 2 display types: the graphical display and the text display. The control panel always has the same keypad and buttons.
The display shows this data.
•
The status of the motor and the drive.
•
Faults in the motor and in the drive.
•
Your location in the menu structure.
If the text in the text display is too long for the display, the text scrolls to show the full text string. Some functions are only available in
the graphical display.
Danfoss A/S © 2019.05
C
D
F
E
®
100 Keypad
B The arrow button UP. Use it to scroll the menu up and to
increase a value.
D The arrow button RIGHT.
F The arrow button DOWN. Use it to scroll the menu down and
to decrease a value.
H The arrow button LEFT. Use it to move the cursor left.
AQ298036140958en-000101 / DPD01711| 89
Control Unit
Advertisement
Table of Contents
