Danfoss VACON 100 INDUSTRIAL Operating Manual page 62

Operating Guide | VACON® 100 Wall-mounted Drives
Procedure for EMC Jumper 1, MR9B
1. Remove the EMC jumper.
2. After the change, write "The EMC level was changed" and the date on the "product modified" label. If the label is not yet attached,
attach it on the drive near the nameplate.
Product modified
62 | Danfoss A/S © 2019.05
Date:
Date:
Date:
Electrical Installation
AQ298036140958en-000101 / DPD01711