Operating Guide | VACON® 100 Wall-mounted Drives
L1
L2
L3
4. Close the cover of the AC drive.
5. After the change, write "The EMC level was changed" and the date on the "product modified" label. If the label is not yet attached,
attach it on the drive near the nameplate.
Product modified
Procedure for 600/690 V
1. Remove the EMC jumper.
2. Attach the cable cover.
3. Close the cover of the AC drive.
4. After the change, write "The EMC level was changed" and the date on the "product modified" label. If the label is not yet attached,
attach it on the drive near the nameplate.
Product modified
Danfoss A/S © 2019.05
DC+
U
V
W
DC-
R-
R+
T1
T2
T3
Date:
Date:
Date:
Date:
Date:
Date:
Electrical Installation
AQ298036140958en-000101 / DPD01711| 57