Operating Guide | VACON® 100 Wall-mounted Drives
5 Mounting
5.1 Wall-mounting Requirements
Install the AC drive in a vertical position on the wall.
If you install the drive in a horizontal position, there is no protection against drops of water that fall vertically. Use the same mounting
points as with vertical installation and pay special attention to cooling requirements (see
Install the AC drive with the screws and other components included in the delivery.
5.2 Flange-mounting Requirements
You can also install the AC drive into the cabinet wall with a flange mounting option.
The protection classes are different in different sections of the drive.
A The cabinet wall or other surface
C The rear
E IP54/UL Type 12
Illustration 4:
Example of Flange Mounting
Danfoss A/S © 2019.05
N O T I C E
A
B
D
B The front
D IP21/UL Type 1
5.3.2
Cooling).
A
C
E
AQ298036140958en-000101 / DPD01711| 25
Mounting