Vlt Micro Drive Selection; Options And Accessories; Local Control Panel (Lcp) - Danfoss VLT Micro Drive PK18 Design Manual

VLT Micro Drive Selection

VLT Micro Drive Design Guide
4 VLT Micro Drive Selection

4.1 Options and Accessories

4.1.1 Local Control Panel (LCP)

4 4
For detailed information on programming, please see Programming Guide MG02CXYY, .
The frequency converter can also be programmed from a PC via RS485 com-port by installing the MCT 10 Set-up Software.
This software can either be ordered using code number 130B1000 or downloaded from the Danfoss Web site:
www.danfoss.com/BusinessAreas/DrivesSolutions/softwaredownload
Illustration 4.1 Description of LCP Buttons and Display
®
26 MG02K102 - VLT is a registered Danfoss trademark