Finishing The Configuration; Preconfiguration; Remote Configuration - DETEWE OpenCom 130 Mounting And Commissioning Manual

take a few minutes to analyse the
transferred file.
Note: You can download the latest
version of the online help from
http://www.detewe.de/.
Finishing the
Configuration
1. When you have completed all
the settings in the Configurator,
you must save the configuration
(see also Saving and Loading the
Configuration on page 62).
2. Then select the Log-off com-
mand in the upper menu bar.

Preconfiguration

Configuration of the OpenCom 130
can be prepared at your DeTeWe
Customer Service Centre or by an au-
thorised DeTeWe dealer. For this pur-
pose, a OpenCom 130 installed here
is programmed with the customer
data (e.g. user data, call distribution
schemes, cord-bound terminals).
This data is stored and then loaded
into the OpenCom 130 at the cus-
tomer's site by a service technician.
This prepared configuration must be
completed at the customer's site
(LAN configuration and DECT termi-
nals).
60
Configuring the OpenCom 130
For configuration of the
OpenCom 130 Internet functions,
first ask the responsible system ad-
ministrator for details of the cus-
tomer's LAN prerequisites.

Remote Configuration

The OpenCom 130 configuration can
also be altered or updated remotely
by a customer service centre or au-
thorised dealer. This requires activa-
tion of internal RAS access in the
OpenCom 130 for the customer serv-
ice centre/authorised dealer.
Note: If one or more MSNs are en-
tered on the PBX Configuration: Sys-
tem: Remote service menu page in
the Configurator and the Status op-
tion is activated, remote configura-
tion access is then activated when a
data call from one of the entered
MSNs is registered.
The customer service centre/author-
ised dealer can then log into the
OpenCom 130 as an administrator:
User name: "Administrator"
■
Password: administrator pass-
■
word
Note: If you do not wish to let the
customer service centre/authorised
dealer know the administrator pass-
word, you can define a temporary
password for remote configuration
with at least five digits.
Configuration