Internet Functions - DETEWE OpenCom 130 Mounting And Commissioning Manual

Every user can read out the
■
charges.
Every user who has a workplace
■
PC can use the OpenCTI 50 to
make calls, manage calls and
messages, dial numbers from

Internet Functions

Note: Settings for mail and ISP and
RAS access are only possible by acti-
vating the OpenCom 130 IP package
in the Web console's Configurator in
the SYS Configuration: Licences
menu. Also refer to Information Re-
garding the Licensing of the IP Pack-
age for the OpenCom 130 on page 14.
RAS access (with or without call-
■
back) can be set up for every
OpenCom 130 user. RAS access
requires activation of the RAS
authorisation.
More than one mail account
■
query can be set up for every
user.
Every user with a system termi-
■
nal can be informed automati-
cally of the receipt of e-mails.
Users can disconnect existing In-
■
ternet connections (via the
OpenCom 130 Web console and
from a system terminal if the
Factory Settings on Delivery
both the central and personal
telephone books, and use the
busy display of the OpenCTI 50.
The multi-company variant is
■
not activated.
function has been configured on
that terminal).
The following IP addresses are pre-
set for the network configuration:
Host name: host
■
IP address: 192.168.99.254
■
Network mask: 255.255.255.0
■
The following addresses are trans-
mitted to the client PCs in the LAN
via DHCP or PPP:
Gateway address:
■
192.168.99.254
Domain name: domain
■
Domain name server:
■
192.168.99.254
PPP addresses: 192.168.100.0 to
■
192.168.100.10
Internet Functions
13