Configuring The Opencom 130; Preparing The Configuration; Starting The Web Console - DETEWE OpenCom 130 Mounting And Commissioning Manual

Configuring the OpenCom 130

Preparing the
Configuration
Before starting with the configura-
tion, make sure you have the follow-
ing documents at hand:
An overview of the ports
■
A list of the terminals to be
■
connected
A list of the IPEIs, if you wish to
■
log on DECT terminals in the se-
cure procedure
A list of the users to be set up
■
(staff entitled to use the services
of the OpenCom 130) with their
names, departments, and the in-
ternal call numbers you want to
allocate to them
For Internet access: the Internet
■
service provider access data.
Data not available for first-time con-
figuration can be updated or cor-
rected at a later date.
Note: Use the Configuration Guide
starting on page 113. This will assist
you in making the settings in the cor-
rect sequence.
Configuration

Starting the Web Console

1. Start your Web browser. Enter
the OpenCom 130 IP address in
the "Address" box:
http://192.168.99.254/.
If the configuration PC gets its IP
address automatically from the
OpenCom 130 or if the
OpenCom 130 is entered as the
domain name server, you can
also start the Web console by
entering the DNS name. The
DNS name in the factory setting
is host.domain. You can change
this in the Configurator (NET
Configuration: Easy Access
menu).
2. The OpenCom 130 Web console
is started. First set the country in
which you are operating the
OpenCom 130, and in which lan-
guage the Web console is to be
displayed.
Configuring the OpenCom 130
57