The Opencom 130 - DETEWE OpenCom 130 Mounting And Commissioning Manual

7. In the Configurator (menu User
Manager: User), assign the user
of the USB DECT Box to a user
group which is allowed to use
RAS access.
8. Configure the Internet access in
the OpenCom 130 Configurator
(menu NET Configuration: Con-
nections: ISP). You can edit/
create suitable filter lists for the
Internet access in the NET Con-
figuration: Safe Access menu.
9. Configure the RAS access in the
NET Configuration: Connec-
tions: RAS menu.
10. Configure the communication
network. To do this, follow the
instructions in the correspond-
ing chapter of the "USB DECT
Box" manual. Do not enter the
provider data, though. Instead,
use the internal number of the
RAS access and the user name
and password of the
OpenCom 130 user.
Detailed information can be found in
the Internet starting on page 127
section of the Frequently Asked Ques-
tions chapter. The information con-
cerning the Internet functionality of
the OpenPhone 25 also applies to
the USB DECT Box.
112
USB DECT Box on the OpenCom 130
Technical Data for
Operation on the
OpenCom 130
Data transmission with RAS
■
access / Internet access via the
OpenCom 130: Up to 64 kbit/s
gross
Data transmission with direct
■
dial-up of a provider: Up to 128
kbit/s gross
Configuring the PC Software