Browser For Opencti - DETEWE OpenCom 130 Mounting And Commissioning Manual

3. Start the copied program by
"Start > Run" and the configura-
tion dialogue is displayed. Select
one of the entries displayed un-
der Existing PBXs. Enter your
user name and password in the
boxes under Log-on.
4. If you activate the Autostart
check box, you will see the
systray display even after re-
starting your PC.

Browser for OpenCTI

You can simplify the daily use of the
OpenCTI using the Web browser es-
pecially adapted for the
OpenCom 130. Each time the work-
station is restarted, this browser pro-
gram can automatically start and log
you in. This means the OpenCTI is al-
ways operational and can be ac-
cessed using the icon in the informa-
tion area of the task bar.
Installing the browser for
OpenCTI
1. Call up the start mask from the
system CD (see Configuring the
PC Software on page 104).
2. From the start mask, select
"Software, Install browser for
OpenCTI". Follow the program
instructions.
108
Browser for OpenCTI
5. Confirm the entries in the con-
figuration dialogue with OK and
the systray display logs on for
the OpenCom 130.
6. Right-click on the
systray display in
the Start bar. Select
Configuration to call up the
configuration dialogue. Select
Network Connections or Trunk
Lines to produce a status dia-
logue.
3. Follow the program instructions.
After installing the browser, there is
a new menu entry in the Windows
start menu under Programs:
OpenCTI Browser.
Further information can be found in
the online help of the browser pro-
gram. To view this, click the top left
corner of the program window on
the system menu icon or on the icon
in the information area of the task
bar. Select the Readme command.
Configuring the PC Software