Finishing The Configuration; Preconfiguration; Remote Configuration - DETEWE opencom 105 Mounting And Commissioning Manual

Please note: After completion of
the loading operation, the system will
take a few minutes to analyse the
transferred file.
Note: You can downed the latest
version of the online help from
http://www.detewe.de/.
Finishing the
Configuration
1. When you have completed all
the settings in the Configurator,
you must save the configuration
(see also Saving and Loading the
Configuration on page 59).
2. Then select the Log-off com-
mand in the upper menu bar.

Preconfiguration

Configuration of the OpenCom 100
can be prepared at your DeTeWe
Customer Service Centre or by an au-
thorised DeTeWe dealer. For this pur-
pose, a OpenCom 100 installed here
is programmed with the customer
data (e.g. user data, call distribution
schemes, cord-bound terminals).
This data is stored and then loaded
into the OpenCom 100 at the cus-
tomer's site by a service technician.
This prepared configuration must be
completed at the customer's site
(LAN configuration and DECT termi-
nals).
Configuration
For configuration of the
OpenCom 100 Internet functions,
first ask the responsible system ad-
ministrator for details of the cus-
tomer's LAN prerequisites.

Remote Configuration

The OpenCom 100 configuration can
also be altered or updated remotely
by a customer service centre or au-
thorised dealer. This requires activa-
tion of internal RAS access in the
OpenCom 100 for the customer serv-
ice centre/authorised dealer.
Note: If one or more MSNs are en-
tered on the PBX Configuration: Sys-
tem: Remote service menu page in
the Configurator and the Status op-
tion is activated, remote configura-
tion access is then activated when a
data call from one of the entered
MSNs is registered.
The customer service centre/author-
ised dealer can then log into the
OpenCom 100 as an administrator:
User name: "Administrator"
■
Password: administrator pass-
■
word
Note: If you do not wish to let the
customer service centre/authorised
dealer know the administrator pass-
word, you can define a temporary
password for remote configuration
with at least five digits.
Configuring the OpenCom 100
57