Actor/Sensor Ports - DETEWE OpenCom 130 Mounting And Commissioning Manual

communication, and use DTMF or
pulse dialling, e.g.
analogue telephones
■
class 3 fax machines
■
analogue modems (external or
■
internal)
external devices for music on
■
hold
external voice mail systems.
■
Additional a/b ports can be provided
by installing interface cards.
Please note: Adhere to the fol-
lowing notes and recommendations
regarding the connection of ana-
logue devices. Devices not meeting
the technical requirements of the
OpenCom 130 can cause damage to
it.
Analogue Telephones
If analogue telephones are to be
used, we recommend the use of de-
vices featuring voice-frequency (VF)
signalling, as the additional features
of the OpenCom 130 cannot be used
with pulse dialling.
Modems
The maximum transmission rate for
analogue modems is 33.6 kbit/s
(V.34+).
Installation
Music on Hold
A suitable external device for music
on hold is the Genius 2000, manu-
factured by Speech Design. If you do
not operate an external MoH device,
the Access 5000 offers an internal
MoH, which you can load in the Web
console Configurator, SYS Configu-
ration: Components menu. For de-
tails, refer to the online Help.
Please note: Use only devices
with an input impedance of
600 ohms, floating connection, for
external music on hold. Incorrect in-
put impedance can cause irreparable
damage to the OpenCom 130.
Voice Mail
If you are using an external voice
mail system, it must be capable of
handling the number of digits used
for internal telephone numbers, e.g.
five digits if you have configured
five-digit internal numbers. We
recommend the following Speech
Design products: Memo 200/300/
400 or Memo 200-A/300-A/400-A.

Actor/Sensor Ports

For the assignment of the ports, re-
fer to the section Ports starting on
page 24. The OpenCom 130 also
functions together with a Freehand
Entry-Phone manufactured by
Siedle or Behnke.
Connectible Devices
35