Generating Your Own Moh Files - DETEWE OpenCom 130 Mounting And Commissioning Manual

OpenCom 130 starts to flash
steadily.
5. Remove the power plug from
the mains socket again.
6. Release the key switch.
The system data is now reset.
7. Replace the power plug in the
mains socket.
The OpenCom 130 now reboots
in the default configuration. The
procedure is completed when all
connected system terminals
show the time on their displays.
8. Log on to the Web console (see
Starting the Web Console on
page 57). Configure the
OpenCom 130 (possibly by load-
ing a saved configuration; see
Saving and Loading the Configu-
ration on page 62).
Generating Your Own
MoH Files
The OpenCom 130 comes with an
internal MoH file for Music on Hold.
The OpenCom 130 product CD con-
tains a number of MoH files with dif-
ferent volume levels, which you can
load at a later time as necessary.
The file format for non-resident Mu-
sic on Hold is *.wav. You can also
64
Configuring the OpenCom 130
save your own MoH in a *.wav file
and load it into the OpenCom 130.
If you have a Windows operating
system, you can use the "Sound
Recorder" program to generate your
own MoH file. This program is usu-
ally located in the Windows direc-
tory called "Multimedia".
The MoH file must be coded with
8000 Hz, 8 bit mono in accordance
with CCITT, A-Law. This coding is
required for the OpenCom 130 and
can be set in the "Sound Recorder"
when you save the file under Format
(CCITT, A-Law) and Attributes (8000
Hz, 8 bit mono).
Note: If you don't have the Sound
Recorder program or the appropriate
codec on your Windows operating
system, you should install these com-
ponents from your Windows CD.
Load your MoH file in the Web con-
sole's Configurator, in the SYS Con-
figuration: Components menu.
Note: When generating your own
MoH file, you may incur a fee for the
use of non-resident melodies (e.g. a
GEMA fee in Germany or MCPS fee in
the UK). The MoH files that come with
your OpenCom 130 can be used free
of charge.
Configuration