Configuration For Linux And Macos; Linux; Macos - DETEWE OpenCom 130 Mounting And Commissioning Manual

Configuration for Linux and MacOS

All modern operating systems sup-
port the TCP/IP protocol. You can
find detailed information on setting
up hardware and software for the
Windows operating systems under
Configuration under Windows start-
ing on page 51. In this section there
are tips on integrating Linux and
MacOS operating systems.

Linux

The Linux network configuration is
usually performed by the set-up pro-
gram with which you install a Linux
distribution. After installation, you
will see a series of "How To's". In
"Linux NET-3-HowTo" and "DHCP
Mini-HowTo" you will find instruc-
tions on TCP/IP configuration.
For the OpenCom 130 to configure
the TCP/IP settings of a Linux system
via DHCP, you must also install the
"dhclient" package and activate con-
figuration via DHCP in the Linux net-
work configuration. To access the
OpenCom 130 Configurator, you
should also install Netscape Commu-
nicator 4.5 (or higher).
56
Configuration for Linux and MacOS

MacOS

The TCP/IP protocol is already inte-
grated in the new MacOS starting
with version 7.6. For the
OpenCom 130 to configure the TCP/
IP settings of a MacOS system via
DHCP, you must set the configura-
tion method to "DHCP Server" in the
menu "Control Panels TCP/IP".
To access the OpenCom 130 Config-
urator, you should also install Net-
scape Communicator 4.5 (or higher)
or Microsoft Internet Explorer 4.5 (or
higher).
Configuration