DETEWE OpenCom 130 Mounting And Commissioning Manual page 14

the signalling of calls on the par-
allel terminals.
The "call queue" function is de-
■
activated.
The "reaction: connection will
■
be disconnected" function is de-
activated because all calls for a
terminal that cannot be reached
or is busy receive a busy signal.
Call forwarding to internal or ex-
■
ternal numbers can be activated.
Call forwarding on no reply is ex-
ecuted after 20 seconds. Door-
way calls can be forwarded.
It is possible to transfer an exter-
■
nal call to an external subscriber.
Three-party conferences can be
■
set up.
Call protection, call-waiting pro-
■
tection and intercom protection
are deactivated.
The transmission of one's own
■
phone number (MSN or system
access number) to the display of
the external party's terminal is
activated, but can be hidden.
The telephone lock can be acti-
■
vated. The terminal PIN is
"0000".
Interception of malicious callers
■
is possible if this feature has
12
Authorisations
been ordered from the network
operator.
Speed dialling is possible if this
■
has been configured in the
OpenCom 130 central tele-
phone book.
The black- and whitelists are not
■
preconfigured and thus not ac-
tive. If these lists are configured,
they can be activated for the
user groups. A special list with
emergency telephone numbers
is preset and activated.
The door opener can be acti-
■
vated from all terminals. Door-
way calls can be forwarded.
Keypad dialling can be used.
■
Call diversion for SMS calls to the
■
wired network is not activated.
The evaluation of connection
■
data by external cost-recording
programs is deactivated.
The cost multiplier is set to
■
100%, i.e. the costs are not mul-
tiplied by any factor.
Every user can change the con-
■
figuration of the OpenCom 130.
Every user can create a personal
■
telephone book and edit entries
in the central telephone book.
Factory Settings on Delivery