Actor/Sensor Ports; Com Port - DETEWE OpenCom 100 Mounting And Commissioning

the OpenCom 100 cannot be used
with pulse dialling.
Modems
The maximum transmission rate for
analogue modems is 33.6 kbit/s
(V.34+).
Music on Hold
A suitable external device for music
on hold is e.g. the Genius 2000, man-
ufactured by Speech Design. If you
do not operate an external MoH de-
vice, the OpenCom 100 offers an in-
ternal MoH, which you can load in
the Web console Configurator, SYS
Configuration: Licences menu. For
details, please refer to the online
Help.
Attention! Use only devices with
an input impedance of 600 ohms, po-
tential-free connection, for external
music on hold. Incorrect impedance
can cause irreparable damage to the
OpenCom 100.
Voice Mail
If you are using an external voice
mail system, it must be capable of
handling the number format
(number of digits) used for internal
telephone numbers, for example,
five digits if you have configured 5-
digit internal numbers. We recom-
mend the Speech Design products
Memo 200/300/400 or Memo 200-A/
300-A/400-A.
22
Connectible Devices

Actor/Sensor Ports

For the assignment of the ports,
please see the section Ports starting
on page 13. The OpenCom 100 also
functions together with a Freehand
Entry-Phone manufactured by Sie-
dle or Behnke.

COM Port

A PC for configuring the OpenCom
100 or transmitting call data can be
connected to the COM port (V.24
port). This call data can be evaluated
in detail with the call charge regis-
tration program OpenCount.
Installation