IBM Power Systems 775 Manual page 251

tftpdir=/tftpboot
timezone=EST5EDT
topology=8D
useNmapfromMN=no
useSSHonAIX=yes
vsftp=y
xcatconfdir=/etc/xcat
xcatdport=3001
xcatiport=3002
Example 3-63 lsdef command output example without flags
# lsdef
c250f10c12ap01 (node)
c250f10c12ap02-hf0 (node)
c250f10c12ap05-hf0 (node)
c250f10c12ap09-hf0 (node)
c250f10c12ap13-hf0 (node)
c250f10c12ap17 (node)
c250f10c12ap18-hf0 (node)
c250f10c12ap21-hf0 (node)
c250f10c12ap25-hf0 (node)
c250f10c12ap29-hf0 (node)
cec12 (node)
frame10 (node)
llservice (node)
lsxcatd
For this command, we list the help description that is shown in Figure 3-30. A typical output is
shown in Example 3-64 on page 238.
# lsxcatd
lsxcatd [-v|--version]
lsxcatd [-h|--help]
lsxcatd [-d|--database]
lsxcatd [-a|--all]
Figure 3-30 lsxcatd command flag description
The following input and output values are used:
Command: lsxcatd -a
Flags:
– -v: Displays xCAT version information
– -d: Displays xCAT database configuration
– -a: Same as -v and -d together
Outputs:
[-v]
Version <X.Y.Z> (svn <build>, built <date>)
[-d]
cfgloc=[DB2]:<xcat_user>|<xcat_password>
dbengine=[DB2]
dbinstance=<database_instance>
Chapter 3. Monitoring assets
237