IBM Power Systems 775 Manual page 249

lsdef
For this command, we check the man page description that is shown in Figure 3-29 on
page 235. Typical output for this command is shown in Example 3-62 on page 236, and
Example 3-63 on page 237.
lsdef [-h|--help] [-t object-types]
lsdef [-V|--verbose] [-l|--long] [-s|--short] [-a|--all] [-S] [-t object-types]
[-o object-names] [-z|--stanza] [-i attr-list] [-c|--compress] [--osimage][[-w
attr==val] [-w attr=~val] ...] [noderange]
-a|--all
Display all definitions.
-c|--compress
Display information in compressed mode, each output line has format ``<object
name>: <data>''. The output can be passed to command xcoll or xdshbak for
formatted output. The -c flag must be used with -i flag.
-h|--help
Display usage message.
-i attr-list
Comma separated list of attribute names to display.
-l|--long
List the complete object definition.
-s|--short
Only list the object names.
-S
List all the hidden nodes (FSP/BPA nodes) with other ones.
noderange
-o object-names
A set of comma delimited object names.
--osimage
Show all the osimage information for the node.
-t object-types
A set of comma delimited object types. Use the help option to get a list of
valid objects.
-V|--verbose
Verbose mode.
-w attr==val -w attr=~val ...
Use one or multiple -w flags to specify the selection string that can be used
to select objects. The operators ==, !=, =~ and !~ are available. Use the help
option to get a list of valid attributes for each object type.
-z|--stanza
Display output in stanza format. See the xcatstanzafile man page for details on
using xCAT stanza files.
Figure 3-29 lsdef man page description
Chapter 3. Monitoring assets
235