IBM Power Systems 775 Manual page 247

Component
xCAT
DB2
AIX and Linux Systems
ISNM
HFI (775 only)
RSCT
PE Runtime Edition
ESSL
Parallel ESSL
Diskless resource (NFS)
Diskless resource
(TFTP)
Command (AIX/Linux)
lsdef
lsxcatd
nodels
tabgrep
xcatsnap
cat /etc/inittab | grep
db2
See Table 3-10 on page 238
cat /etc/inittab | grep
cnm
cat /etc/inittab | grep
hdwr_svr
chkconfig --list | grep
hdwr_svr
lsnwconfig
lslpp -L | grep -i hfi
hfi.snap
cat /etc/inittab | grep
ctrmc
chkconfig --list | grep
ctrmc
rset_query
NA
NA
cat /etc/exports
cat /etc/tftpaccess.ctl
Description
Displays xCAT object definitions that are
stored in xCAT database.
Queries xcatd daemon for database
information.
Lists the nodes, and their attributes, from the
xCAT database.
Lists table names in which an entry for the
node appears.
Gathers xCAT configuration that is needed for
support (does not send it to support).
Lists if DB2 Fault monitor coordinator is
configured to start in inittab file.
Lists if the CNM daemon is configured to start
in inittab file.
AIX only: Lists if the Hardware Server
daemon is configured to start in inittab file.
Linux only: Lists the init levels where the
Hardware Server daemon is configured to
start.
Displays the active network management
configuration parameters.
Displays the current HFI driver version
installed.
Gathers HFI configuration that is needed for
support (does not send to support). Default
path: /var/adm/hfi/snaps
AIX only: Lists if the RMC daemon is
configured to start in inittab file.
Linux only: Lists the init levels where the RMC
daemon is configured to start.
Displays information about the memory
affinity assignments that are performed.
IBM Engineering and Scientific Subroutine
Library for AIX and Linux on POWER.
Parallel Engineering and Scientific
Subroutine Library for AIX.
Displays information about the configured
NFS exported directories.
AIX only: Displays information about the
configured TFTP directories.
Chapter 3. Monitoring assets
233