Table of Contents
Advertisement
P7IH-DE enclosures found: <enclosure_name>
{
Enclosure <enclosure_name>:
{{
Enclosure <enclosure_name> STOR <physical_location_portcard> sees <portcards_list>
Portcard <portcard>: <ses>[code_A]/<mpt_sas>/<disks> diskset "<diskset_id>"
Enclosure <enclosure_name> STOR <physical_location_portcard> sees <total_disks>
[...]
}}
{{
[depends] Carrier location <physical_location> appears <description>
[...]
}}
Enclosure <enclosure_name> sees <total_enclosure_disks>
[...]
}
{
<mpt_sas>[code_B] <systemp_physical_location> <enclosure_name> {STOR <id>
[...]
}
Attributes:
– <stdin_or_file>: Output from the mmgetpdisktopology command, either by file or stdin
output redirection.
– <enclosure_name>: Name of the Disk Enclosure (DE).
– <physical_location_portcard>: Portcards location identification.
– <portcards_list>: Portcards detected.
– <ses>: Portcard logical SAS device controller, one for each row of disks (four rows
total).
– <mpt_sas>: Power 775 SAS Card Link (logical).
– <disks>: Disks visible in a specific path.
– <diskset_id>: Disk ID representing a diskset visible in a specific path.
– <total_disks>: Total number of disks visible in one STOR area by one or two portcards.
– <physical_location>: Power 775 physical location for SAS cards.
– <description>: Information about the detected problem.
– <total_enclosure_disks>: Total number of disks visible in the DE.
– <systemp_physical_location>: Physical location for the SAS card in the 775 CEC.
– <id>: STOR location area ID.
– <ses_connectors>: Logical connections to corresponding portcard.
Important: The contents for the file /output_from_mmgetpdisktopology.file in
Example 3-12 are summarized in Example B-1 on page 324.
Example 3-12 topsummary output example
# topsummary /output_from_mmgetpdisktopology.file
P7IH-DE enclosures found: 000DE22
Enclosure 000DE22:
<portcard> (<ses_connectors>) [...]}
Chapter 3. Monitoring assets
175
Advertisement
Table of Contents
