Figure 5-4 QCM1 to QCM2 move
This procedure is repeated until all compute QCMs are functionally replaced.
When all the functional QCMs in one CEC are exhausted, a CEC move is arranged. (The
alternate CEC locations are defined by IBM.) A complete CEC is moved to a different CEC,
which includes the PCI cards that are used by the other CEC. This move also requires the
swapnode command and some physical maintenance for the PCI cards.
If no other CEC is available in the rack, the IBM SWAT Team swaps a CEC from one Frame to
the Rack that requires the non-compute function.
309
Chapter 5. Maintenance and serviceability