Parameter Lists; Parameter Options; Default Settings - Danfoss VLT HVAC Basic Drive FC 100 Series Programming Manual

Parameter Lists

5 Parameter Lists

5.1 Parameter Options

5.1.1 Default settings

Changes during operation:
"TRUE" means that the parameter can be changed while the adjustable frequency drive is in operation and "FALSE" means
that the adjustable frequency drive must be stopped before a change can be made.
2 set-up:
'All set-up': The parameter can be set individually in each of the two set-ups, i.e., one single parameter can have two
different data values.
'1 set-up': the data value will be the same in all set-ups.
ExpressionLimit:
Size related
N/A:
No default value available.
Conversion index:
This number refers to a conversion figure used when writing or reading by means of an adjustable frequency drive.
Conv. 100 75 74 70
index
Conv. 1 3,600,00 3,60 60
facto 0 0
r
Table 5.1
Data type Description
2 Integer 8
3 Integer 16
4 Integer 32
5 Unsigned 8
6 Unsigned 16
7 Unsigned 32
9 Visible String
33 Normalized value 2 bytes
35 Bit sequence of 16 Boolean variables
Table 5.2
®
VLT HVAC Basic Drive Programming Guide
67 6 5 4
1/60 1,000,0 100,00 10,00 1,000 100
00 0 0
®
MG18B222 - VLT is a registered Danfoss trademark
3 2 1 0 -1 -2
10 1 0.1 0.01 0.001 0.000
-3 -4 -5 -6
0.00001 0.00000
1 1
Type
Int8
Int16
Int32
Uint8
Uint16
Uint32
VisStr
N2
V2
5-1
5 5