Fuses And Bulbs - Seat Ateca Owner's Manual

Hide thumbs Also See for Ateca:
Table of Contents

Advertisement

CAUTION
The towing eye must always be completely
and firmly tightened. Otherwise, it could be
released while towing and tow-starting.
If the vehicle is factory-equipped with a
towing bracket, it is only allowed to tow with
a tow bar if this has been specially designed
to be installed with a tow hitch. If an unsuita-
ble tow bar is used, both the tow hitch and
the vehicle may be damaged. Instead, a tow
rope should be used.
Driving tips for towing
Towing requires some expertise and experi-
ence, especially when using a tow rope. Both
drivers should be familiar with the difficulties
involved in towing. For this reason, inexper-
ienced drivers should abstain from towing.
During towing, it should be ensured that no
impermissible tractive forces or shocks are
generated. When towing on an unpaved
road, there is always a risk of overloading
and damaging the anchorage points.
During towing, the towing vehicle can signal
the change of direction even with the hazard
warning lights turned on. To do so, at the
same time, the turn signal lever must be op-
erated with ignition switched on. Meanwhile,
the hazard warning lights will go off. When
the turn signal lever is returned to the rest
102
Emergencies
position, the hazard warning lights will be
automatically reactivated.
Notes for the driver of the towed vehicle
Leave the ignition on, so that the steering
is not blocked, and the electronic parking
brake may be deactivated and the turn sig-
nals and wash/wipe operated.
More strength is required at the steering
wheel as the power steering does not oper-
ate when the engine is switched off.
You should depress the brake much harder
as the brake servo does not operate. Avoid
hitting the towing vehicle.
Bear in mind the information and instruc-
tions in the manual of the vehicle to be tow-
ed.
Notes for the driver of the towing vehicle
Accelerate with particular care and caution.
Avoid sharp manoeuvres.
Brake earlier than usual and smoothly.
Bear in mind the information and instruc-
tions in the manual of the towed vehicle.

Fuses and bulbs

Fuses
Introduction
In general, a fuse can be assigned to various
electrical components. Likewise, an electrical
component can be protected by several
fuses.
Only replace fuses when the cause of the
problem has been solved. If a newly inserted
fuse blows after a short time, you must have
the electrical system checked by a special-
ised workshop as soon as possible.
WARNING
The high voltages in the electrical system can
give serious electrical shocks, causing burns
and even death!
Never touch the electrical wiring of the igni-
tion system.
Take care not to cause short circuits in the
electrical system.
WARNING
Using unsuitable fuses, repairing fuses or
bridging a current circuit without fuses can
cause a fire and serious injury.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents