Information On Fuel Consumption - Seat Toledo 2015 Owner's Manual

Table of Contents

Advertisement

Type plate
›››
The type plate
Fig. 165
is located at the
bottom of the front driver side door pillar be-
tween the front and rear doors.
The type plate indicates the following
weights:
Total permitted weight of the vehicle
8
when loaded
Maximum authorised weight of the vehi-
9
cle with a trailer, when the vehicle oper-
ates as a tractor
Maximum permitted load of the front axle
10
Maximum permitted load of the rear axle
11
Weight in running order
The weight in running order only has one ap-
proximate value. This value corresponds to
the minimum operative weight of the vehicle
without additional equipment that increases
its weight, i.e. air conditioning, spare wheel,
towing bracket.
The running order weight also includes 75 kg
of the weight of the driver and service fluids,
in addition to a fuel tank at 90% capacity.
From the difference between the total permit-
ted weight in running order the approximate
carrying capacity can be calculated
The carrying capacity must include:
occupants,
Technical specifications
all pieces of equipment and other weights,
roof loads including the roof rack,
equipment that is not included in the run-
ning order weight,
when using the towing bracket, the draw-
bar load (max. 50 kg)
Calculating fuel consumption and CO
emissions according to the ECE regulations
and the EU specifications
Calculation of fuel consumption for urban
driving begins when cold-starting the engine.
Then, normal city driving is simulated.
In calculating extra-urban driving fuel con-
sumption, braking and acceleration is done
in all gears, as in daily use of the vehicle.
Driving speed varies within a range of 0 and
120 km/h (75 mph).
The consumption value in combined driving
is composed of 37% of the value of urban
driving and 63% of the value of extra-urban
driving.
WARNING
The maximum permitted weight values must
not be exceeded – Risk of an accident and
damage to the vehicle!
›››
.
Note
If you wish to calculate the exact weight of
your vehicle please contact a SEAT dealer.
Depending on the volume of equipment,
driving style, road conditions, weather condi-
tions and the condition of the vehicle, con-
sumption values can differ from the theoreti-
cal values stated here.
Information on fuel
2
consumption
Fuel consumption
The consumption and emission details
shown on the vehicle data sticker differ from
one vehicle to another.
Vehicle fuel consumption and CO
appear on the vehicle data sticker in the
spare wheel well, inside the boot and on the
rear cover of the Maintenance Programme.
The fuel consumption and CO
ues refer to the weight category assigned to
your vehicle according to the engine and
gearbox combination, as well as the specific
equipment fitted, and is only used to com-
pare between the different models.
The fuel consumption and CO
not depend only on the performance of the
vehicle, they can also differ from the estab-
lished values depending on other factors
such as driving style, road conditions, traffic
conditions, environmental conditions, load
and number of passengers.
emissions
2
emission val-
2
emissions do
2
»
175

Advertisement

Table of Contents
loading

Table of Contents