System Info; H Flip; Test Pattern; Function Key - Ikegami HLE-1853G Operation Manual

■

System Info

- Used to control all additional updates
Firmware Version
FPGA Version
■

H Flip

- Used to reverse the display image horizontally
[ On, Off ]
*remark: OSD also flips which gives difficulty to read OSD menu
■

Test Pattern

- Used to generate internal test patters
- turn the main knob to select a test pattern in preference
- press the jog for two seconds to exit the test pattern
■

Function Key

- All front function keys are programmable with any features that are included in the monitor
- Only one feature can be assigned per one function key
Function Key 1
Function Key 2
Function Key 3
Function Key 4
Function Key 5
Function Key 6
Function Key 7
Function Key 8
■
Marker
- Used to activate marker feature
market type selection
Marker Type
[ Off, 16:9, 4:3, 15:9, 14:9, 13:9, 1.85:1, 2.35:1 ]
select input of the safety resolution rate
Safety Area
[ Off, 95%, 93%, 90%, 88%, 85%, 80%, EBU Action, EBU Graphic ]
Center Marker On / Off Center Marker
Advanced (cont'd)
▶ Advanced
Main
displays current firmware version
displays current FPGA version
▶ Advanced
Main
▶ Advanced
Main
Function key
▶ Function Key
Main
[ Blue/ mono, HDMI,
Vectorscope, H/V Delay, SDI Output, HDMI Output,
Center Marker, Safety Area, Audio Level Meter,
Timecode, Max Bright, Aspect,
Mode, Still, Focus Assist, DSLR Scale, YPBPR, SDI ]
Marker
▶ Marker
Main
▶ System Info
▶ H Flip
▶ Test Pattern
UMD Type, Waveform,
HDMI CSC, Zoom
17