Parallel Remote Connection; Pin Function; Connectors Used - Ikegami HTM-1917R Operation Manual

3-2. Parallel Remote Connection

(1) Pin function

1
5
<Connector Face View on Rear Panel>
Pin No. Function
1 GND ON
2 CH-B ON
3 CH-C ON
4 Green. TALLY ON
5 YPbPr/RGB ON
6 SD-SDI ON
7 MONO ON
8 RGB ON
9 EXT-SYNC ON
10 16:9 ON
11 N.C
12 MARKER ON
13 SHADOW ON
14 Red TALLY ON
15 HD-SDI/Multi SDI ON
(2) Connectors used (Standard accessories)
D-sub 15-pin (male) mini type
•Connector: HDB-15M (3011-15) Made by Japan Aviation Electronics Industry (or equivalent)
•Case: DE-C-J9-F2-1R
6
11
10
15
Connecting remote terminals to this pin enables ON control.
Connect to Pin 1 to select B channel.
* When Pins 2 and 3 are both OPEN, the A channel will be selected.
Connect to Pin 1 to select C channel.
* When Pins 2 and 3 are both OPEN, the A channel will be selected.
Connect to Pin 1 to set G TALLY to ON.
Connect to Pin 1 to select the component video (YPbPr/RGB) input.
Use together with Pin 2 to switch between channels A and B.
* When Pins 5, 6 and 15 are all OPEN with DE-801 mounted, the analog
composite will be selected.
Connect to Pin 1 to select the digital video (SD-SDI) input.
Use together with Pin 2 to switch between channels A and B.
* When Pins 5, 6 and 15 are all OPEN with DE-801 mounted, the analog
composite will be selected.
Connect to Pin 1 to switch the COLOR/MONO setting to MONO.
Connect to Pin 1 to switch the YPbPr/RGB setting to RGB.
Connect to Pin 1 to switch the analog input sync to external sync (EXT SYNC).
Connect to Pin 1 to switch the aspect (4:3/16:9) setting to 16:9.
When the aspect is set to 4:3 for HDTV signal, [HD4:3 SCAN] mode is entered.
If the setting is to be controlled simultaneously with channel switching, set
[CHANGE ASPE] to [MANUAL] in MENU 2-4.
No connection
Connect to Pin 1 to set 4:3 MARKER to ON.
Connect to Pin 1 to set SHADOW to ON.
Connect to Pin 1 to set Red TALLY to ON.
Connect to Pin 1 to select the HD-SDI or Multi-SDI input module.
Use together with Pin 2 to switch between channels A and B.
* When Pins 5, 6 and 15 are all OPEN with DE-801 mounted, the analog
composite will be selected.
Made by Japan Aviation Electronics Industry
GND
1
CH-B ON
2
CH-C ON
3
Green TALLY ON
4
YPbPr/RGB ON
5
SD-SDI ON
6
MONO ON
7
RGB ON
8
EXT-SYNC ON
9
16 : 9 ON
10
NC
11
MARKER ON
12
SHADOW ON
13
Red TALLY ON
14
HD-SDI/MULTI SDI ON
15
<Wiring of Remote Connector>
External Assignment for Function
12