Table of Contents
Advertisement
3.2 Parallel remote connection
(1) Pin function
Remote connector wiring
GND
1
CH-B on
2
N.C
3
G TALLY on
4
RGB/YPbPr on
5
SD-SDI on
6
MONO on
7
RGB on
8
EXT-SYNC on
9
16:9 on
10
N.C
11
MARKER on
12
N.C
13
R TALLY on
14
HD-SDI/Multi-SDI on
15
(2) Connector (standard accessory)
D sub 15-pin (male) mini-type connector
• HDB-15M (3011-15) Japan Aviation Electronics Industry-made
Functions of HTM-1050*/HTM-1005* parallel remote pins
Pin No.
Name
1
GND
2
CH-B on
3
N.C
4
G TALLY on
5
RGB/YPbPr on
6
SD-SDI on
7
MONO on
8
RGB on
9
EXT-SYNC on
10
16:9 on
11
N.C
12
MARKER on
13
N.C
14
R TALLY on
15
HD-SDI/
Multi-SDI on
15
Operation
Connecting each remote terminal to Pin 1 allows
On-control.
Connect to Pin 1 to select the B-channel at the time of
analog composite, SD-SDI, HD-SDI input.
* If both Pin 2 and Pin 3 are open, the A-channel will be
selected.
Free terminal
Connect to Pin 1 to turn on G TALLY.
Connect to Pin 1 to select the RGB/YPbPr input.
For the A/B switching, Pin 2 is used at the same time.
* If Pin 5, Pin 6 and Pin 15 are open when DE-1051 is
mounted, analog composites will be selected.
Connect to Pin 1 to select the SD-SDI input module.
For the A/B switching, Pin 2 is used at the same time.
* If Pin 5, Pin 6 and Pin 15 are open when DE-1051 is
mounted, analog composites will be selected.
Connect to Pin 1 to set COLOR/MONO to MONO.
Connect Pin 1 to set the RGB/YPbPr mode to RGB
when the RGB/YPbPr input is selected.
Connect Pin 1 to set the sync of analog input to
external synchronization (EXT-SYNC).
Connect to Pin 1 to set the aspect ratio (4:3/16:9) of
SDTV signal to 16:9. For HDTV signal, the switching
to 4:3 is done in the HD4:3 SCAN mode.
To perform the channel switching and control at the
same time, set the menu item 2-4 "CHANGE ASP." to
"MANUAL".
Free terminal
Connect to Pin 1 to turn on the 4:3 marker.
Free terminal
Connect to Pin 1 to turn on R TALLY.
Connect to Pin 1 to select the HD-SDI/Multi-SDI input
module. For the A/B switching, Pin 2 is used at the
same time.
* If Pin 5, Pin 6 and Pin 15 are open when DE-1051 is
mounted, analog composites will be selected.
Advertisement
Table of Contents
