Change Of Preset Data - Ikegami HLM-905WR Operation Manual

Change of preset data

Change the data of a file selected in " " (a) Selection
of files" on the preceding page.
How to change data
Select "CHANGE DATA" and press the ENT
switch. The following "CHANGE DATA" menu
appears.
Adjustable
HUE
Used to set the hue (only for NTSC signals).
CHROMA
Used to set the color density.
BRIGHT BRIGHTNESS
Used to set the black level.
CONT CONTRAST
Used to set the white level.
R.BKG R.BACKGROUND
Used to set the black balance (red component) in
the dark zone.
G.BKG G.BACKGROUND
Used to set the black balance (green compo-
nent)in the dark zone.
B.BKG B.BACKGROUND
Used to set the black balance (blue component)in
the dark zone.
R.GAIN
Used to set the white balance (red component) in
the bright zone.
G.GAIN
Used to set the white balance (green compo-
nent)in the bright zone.
B.GAIN
Used to set the white balance (blue compo-
nent)in the bright zone.
APT LEVEL
Used to set the aperture level in the "0-63" range.
Default setting is 16.
APT FREQ.
Used to set the aperture frequency. LOW (low
frequency), MID1, MID2, HIGH (high fre-
quency)
Default setting is HIGH.
(a) File being selected
(b) HUE data
(c) CHROMA data
(d) BRIGHTNESS data
(e) CONTRAST data
(f) R. BACKGROUND data
(g) G. BACKGROUND data
(h) B. BACKGROUND
(i) R. GAIN data
(j) G. GAIN data
(k) B. GAIN data
(l) Aperture level
(m) Aperture frequency
- 51 -