Display Of Preset Data List; Copying Of File Data; Setting Of File Change Operation At The Time Of Channel Change; Setting Of Data Protection Password - Ikegami HLM-3250W Operation Manual

③ Display of preset data list

（ＰＲ Ｅ ＳＥＴ ＤＡ Ｔ Ａ ＳＴＡＴ Ｕ Ｓ）
ＳＥＬ Ｅ ＣＴ ＦＩＬ Ｅ Ｄ６５
１.Ｈ Ｕ Ｅ ０
２ . ＣＨ Ｒ ＯＭＡ ０
３ . ＢＲ Ｉ ＧＨＴ ０
４ . ＣＯ Ｎ Ｔ ０
５ . Ｒ． Ｂ ＫＧ ０
６ . Ｇ． Ｂ ＫＧ ０
７ . Ｂ． Ｂ ＫＧ ０
８ . Ｒ． Ｇ ＡＩＮ ０
９ . Ｇ． Ｇ ＡＩＮ ０
10 . Ｂ ． Ｇ ＡＩＮ ０
11 . Ｇ Ａ Ｍ ＭＡ ２． ２
12 . Ａ Ｐ Ｔ ＬＥＶＥＬ １６
13 . Ａ Ｐ Ｔ ＦＲＥＱ． ＨＩ Ｇ Ｈ
ＥＸＩ Ｔ →
ESC
Display a list of the settings of file data.
To change files, use the
SELECT FILE setting.

④ Copying of file data

（ＣＯＰＹ Ｆ ＩＬＥ）
ＦＲＯＭ ： Ｄ ６ ５
↓
ＴＯ ： ＦＩＬＥ １
ＳＥＴ → ＥＸＩＴ →
ENT ESC
(a) Select the copy source file (D65, D93, FILEx [x: 1
to 8]) using the ▲ / ▼ switch and press the ENT
switch.
(b) Select the copy destination file (FILEx [x: 1 to 8],
FILE1 - FILE8) using the ▲ / ▼ switch.
* When FILE1 - FILE8 are selected, data is copied
to FILE1 through FILE8.
(c) When the ENT switch is pressed, the copy
confirmation message appears. To copy, press the
ENT switch again. If not, press the ESC switch.
⑤ Setting of file change operation at the time of
channel change
Set the association of channel change with file
change.
• AUTO : Files are memorized for each channel:
When a channel is changed to
another, an automatically stored file
is picked up.
• MANUAL: Just one file preset for all channels
is fixed.
• Default setting is AUTO.
(a) File being selected
(b) HUE data
(c) CHROMA data
(d) BRIGHT data
(e) CONTRAST data
(f) R. BACKGROUND data
(g) G. BACKGROUND data
(h) B. BACKGROUND data
(i) R.GAIN data
(j) G.GAIN data
(k) B.GAIN data
(l) Gamma data
(m) Aperture level
(n) Aperture frequency
and switches at the
(a) Selection of copy
source file
(b) Selection of copy
destination file
- 39 -

⑥ Setting of data protection password

A password is set to prevent modifications of the
preset data and the initialization.
（Ｌ Ｏ ＣＫ Ｆ ＩＬ Ｅ ／Ｄ Ａ ＴＡ）
ＳＴ Ａ ＴＵＳ ： ＵＮ Ｌ ＯＣ Ｋ
−Ｅ Ｎ ＴＥＲ ＰＡ Ｓ ＳＷ Ｏ ＲＤ−
ＡＢ Ｃ ＤＥＦ Ｇ ＨＩ Ｊ ＫＬ Ｍ ＮＯＰ Ｑ ＲＳ Ｔ ＵＶ Ｗ ＸＹ Ｚ
１２ ３ ４５６ ７ ８９
ＰＡ Ｓ ＳＷＯ Ｒ Ｄ ＊＊ ＊ ＊
ＳＥ Ｔ → Ｅ ＸＩ Ｔ →
ENT ESC
（Ｌ Ｏ ＣＫ Ｆ ＩＬ Ｅ ／Ｄ Ａ ＴＡ）
ＳＴ Ａ ＴＵＳ ： ＵＮ Ｌ ＯＣ Ｋ
−Ｅ Ｎ ＴＥＲ ＰＡ Ｓ ＳＷ Ｏ ＲＤ−
ＡＢ Ｃ ＤＥＦ Ｇ ＨＩ Ｊ ＫＬ Ｍ ＮＯＰ Ｑ ＲＳ Ｔ ＵＶ Ｗ ＸＹ Ｚ
１２ ３ ４５６ ７ ８９
ＰＡ Ｓ ＳＷＯ Ｒ Ｄ ＡＢ Ｃ Ｄ
ＭＯ Ｄ Ｅ ＡＬ Ｌ ＬＯ Ｃ Ｋ
ＳＥ Ｔ → Ｃ ＡＮ Ｃ ＥＬ →
ESC
ENT
(a)Display of currently set lock mode
• The currently set lock mode is displayed.
•UNLOCK : The lock is released and all
data can be changed.
•DATA LOCK: Preset data change is locked,
a l t h o u g h f i l e c h a n g e i s
possible.
•ALL LOCK : Preset data change and file
change are impossible.
(b)Password menu
• Select characters from this list using the ▲ ,
▼ , and switches and press the ENT
switch to set the password.
(c) Password entry
• When setting the lock mode to ALL LOCK or
DATA LOCK or when releasing the lock mode
(UNLOCK), select characters from the menu
in ② and enter a four-digit password here.
* If you forget the registered password, contact
Ikegami's service office. They have a password
for releasing the lock.
(d)Setting of LOCK mode
• When the ENT switch is pressed after the
password has been entered, the LOCK mode
blinks. Execute the setting by pressing the
ENT key. To return to the previous state, press
the ESC switch.
(a) Display of currently
set lock mode
(b) Password menu
(c) Password entry
(d) Setting of lock
mode