Table of Contents
Advertisement
2. Specifications
2.1 Common specifications
(1) General
1. Power supply
a) AC-only type (standard)
AC, single-phase, 50/60 Hz
100 V to 240 V ±10%
Power consumption: Approx. 95 W
b) AC/DC type (for use of optional DAC1051)
AC, single-phase, 50/60 Hz
100 V area: 100 V to 120 V ±10%
200 V area: 200 V to 240 V ±10%
Power consumption: Approx. 120 W
DC: 12 V ±10%
Power consumption: Approx. 100 W
* The power consumption above is at maximum load with full
options installed.
2. Ambient temperature
0°C to +40°C
3. Humidity
90% or less (no condensation)
4. Outside dimensions/mass
222 (W) x 213 (H) x 415 (D) mm
Approx. 10 kg
5. Standard accessories
Power cable, remote connector, operation manual ... 1 set, each
6. Use
Continuous
7. X-ray radiation
0.1 mR/H or less
(in all areas 50 mm away from the outside of the monitor)
(2) Video signal system
1. Frequency response
a) HDTV (YPbPr/RGB input)
60 Hz to 17 MHz: +1/-3dB
17 MHz or higher: Downward characteristics
b) SDTV (Composite input)
60 Hz to 7 MHz: +1/-3dB
7 MHz or higher: Downward characteristics
2. Sag
Within 5%
3. Black level stability
Within 1% against a change of APL 10% to 90%
4. Aperture correction
+6 dB or more is variable at the following frequencies.
a) HDTV
10 MHz ±2.5 MHz
b) SDTV (for use of DE-1051)
5 MHz ±1 MHz
* No effect on the RGB input digital component or SDTV YPbPr
input
5. Noise
Sync noise: -40 dB or less
Hum noise: -40 dB or less
Others:
-40 dB or less
(3) Brightness and contrast
1. CRT
Dot trio pitch: 0.28 mm
2. Horizontal resolution
500 lines or more (HDTV) when the value in the screen center
is 120 cd/m
2
(35 fl) for YPbPr input
3. Preset contrast
Factory-set value: 120 cd/m
4. Maximum brightness
200 cd/m
2
or more
(100% window signal input, Brightness: PRESET,
Contrast: MAX)
(4) Deflection/sync system
1. 16:9 display size
a) NORMAL: W174 x H98 mm
b) UNDER: W160 x H90 mm
2. Deflection
a) NORMAL SCAN (4:3/16:9)
b) UNDER SCAN (4:3/16:9)
3. Deflection distortion
Within ±1% of screen height
(Deflection linearity and raster distortion)
4. Sync stability
Steady operation is provided when the input signal is within the
range below.
Internal sync: Video input level rated value ±6 dB
External sync: External sync input level 0.3 to 6 Vp-p
5. High voltage
Generated high voltage: 19 kV ±1 kV
High voltage fluctuation: Within ±0.5% when the beam current
6. Convergence
90% area of screen height: Within 0.4 mm
90% area of screen width: Within 0.5 mm
3
2
(35 fl)
is in the range 0 to 300 µ A
(Reference: 100 µ A)
Advertisement
Table of Contents
