Alarm Table - Siemens SENTRON ATC6300 Manual

5.1.6.3

Alarm table

The alarms have the following properties (for a definition of the properties, please refer to
chapter Properties of the alarms (Page 47):
The properties of the alarms can be modified using Menu P16. This can be selected from the
setup menu. For information on the selection procedure, please refer to chapter
Parameterization of the user interface (Page 115).
Code Description
A01 Battery voltage too low
A02 Battery voltage too high
A03 Fault breaker Line 1
A04 Fault breaker Line 2
A05 Line 1 wrong phase sequence
A06 Line 2 wrong phase sequence
A07 Load not powered timeout
A08 External battery charger failure
A09 Emergency
A10 Line 1 breaker protection trip
A11 Line 2 breaker protection trip
A12 Line 1 generator not available
A13 Line 2 generator not available
A14 Maintenance Hours 1
A15 Maintenance Hours 2
A16 Maintenance operations 1
A17 Maintenance operations 2
A18 Auxiliary voltage failure
Note
The "Inhibited" and "No LCD" functions are not activated in the factory settings, but can be
selected or deselected by the user.
3KC ATC6300 transfer control device
Manual, 03/2018, L1V30535632002A-01
Ena- Only Re- Global
bled AUT tained alarm
x x
x x
x x x
x x x
x x
x x
x x
x x
x x
x x
x
x
x
x
x
x
x
5.1 Basic functions
Lock Lock Siren
BRK BRK
1 2
x x
x x
x x x
x x x
x x
x x
x x
x x
x x
x x x x
x x x x
x x
x x
x x
Functions
Lock No
LCD
49