Siemens SENTRON ATC6300 Manual page 66

Installation
6.2 Installation of the ATC6300
Installation procedure
Note
Sequence of operations during installation
If you are using the cover frame 3KC9000-8TL67, fit this before installing the ATC6300.
1. Attach the cover frame 3KC9000-8TL67 to the ATC6300.
2. Mount the ATC6300 in the door cutout.
3. Attach the two clips on the side of the ATC6300 and press these toward the back to
engage them.
4. Repeat this procedure for the other side.
5. Tighten the fixing screws with a torque of 0.5 Nm until the device is firmly mounted in the
door cutout.
To remove the ATC6300, perform these steps in reverse order.
64
3KC ATC6300 transfer control device
Manual, 03/2018, L1V30535632002A-01