Operation; Operating Modes Of The Atc6300; Setting The Operating Mode - Siemens SENTRON ATC6300 Manual

Operation

8.1

Operating modes of the ATC6300

The ATC6300 transfer control device has three operating modes:
● OFF mode
● Manual mode
● Automatic mode
8.1.1

Setting the operating mode

The operating mode can be set using the keys on the ATC6300.
To set the mode, press the appropriate key OFF, MAN or AUT for 0.5 s.
Note
Further procedure in manual mode
In manual mode a dialog opens for selection of the line. For further information, please refer
to chapter Manual mode (Page 102).
3KC ATC6300 transfer control device
Manual, 03/2018, L1V30535632002A-01
8
101