Relay Option Mcb - Danfoss VLT FC 102 Series Design Manual

Selection

3.1.7 Relay Option MCB 105

The MCB 105 option includes three pieces of SPDT contacts and must be fitted into option slot B.
Electrical Data:
1)
Max terminal load (AC-1) (Resistive load)
1)
Max terminal load (AC-15) (Inductive load @ cosφ 0.4)
Max terminal load (DC-1) 1) (Resistive load)
1)
Max terminal load (DC-13) (Inductive load)
Min terminal load (DC)
Max switching rate at rated load/min load
1)
IEC 947 part 4 and 5
When the relay option kit is ordered separately, the kit includes:
•
Relay Module MCB 105
•
Extended LCP frame and enlarged terminal cover
•
Label for covering access to switches S201, S202 and S801
•
Cable strips for fastening cables to relay module
1
2
Figure 3.5 Relay Option MCB 105
A2-A3-A4-B3
NOTICE!
1)
IMPORTANT! The label MUST be placed on the LCP frame as shown (UL-approved).
Table 3.5 Legend to Figure 3.5 and Figure 3.6
MG11BC22
Design Guide
Danfoss A/S © Rev. 06/2014 All rights reserved.
240 V AC 0.2 A
24 V DC 0.1 A
A5-B1-B2-B4-C1-C2-C3-C4
3 3
240 V AC 2A
24 V DC 1 A
5 V 10 mA
-1 -1
6 min /20 s
61