Danfoss VLT FC 102 Series Design Manual page 78

How to Order
Type
Miscellaneous hardware I
Backplate
Backplate
Backplate
Backplate
Backplate
4 4
Backplate
Backplate
Backplate
LCPs and kits
LCP 101
102
cable
kit
LCP kit
kit
kit
kit
Table 4.3 Options can be ordered as factory built-in options, see ordering information.
Type
Options for Slot A
MCA 101
MCA 104
MCA 108
MCA 109
MCA 120
MCA 121
Options for Slot B
MCB 101
MCB 105
MCB 109
MCB 112
MCB 114
Option for Slot D
MCB 107
External Options
Ethernet IP
Table 4.4 Ordering Information Options
For information on serial communication bus and application option compatibility with older software versions, contact your Danfoss supplier.
76
Design Guide
Description
B2 IP21/IP55 / NEMA 12
C1 IP21/IP55 / NEMA 12
C2 IP21/IP55 / NEMA 12
A5 IP66
B1 IP66
B2 IP66
C1 IP66
C2 IP66
Numerical Local Control Panel (NLCP)
Graphical Local Control Panel (GLCP)
Separate cable, 10 ft [3 m]
Panel mounting kit including graphical LCP, fasteners, 10 ft [3 m] cable and
gasket
Panel mounting kit including numerical LCP, fasteners and gasket
Panel mounting kit for all LCPs including fasteners, 10 ft [3 m] cable and
gasket
Front mounting kit, IP55 enclosures
Panel mounting kit for all LCPs including fasteners and gasket - without
cable
Description
Profibus option DP V0/V1
DeviceNet option
Lonworks
BACnet gateway for built-in. Not to be used with the relay option MCB 105 card
Profinet
Ethernet
General purpose Input Output option
Relay option
Analog I/O option and battery backup for real-time clock
ATEX PTC
Sensor input - uncoated
Sensor input - coated
24 V DC backup
Ethernet master
Danfoss A/S © Rev. 06/2014 All rights reserved.
Ordering no.
130B3397
130B3910
130B3911
130B3242
130B3434
130B3465
130B3468
130B3491
130B1124
130B1107
175Z0929
130B1113
130B1114
130B1117
130B1129
130B1170
Comments
Ordering no.
Coated
130B1200
130B1202
130B1206
130B1244
130B1135
130B1219
130B1243
130B1137
130B1172
130B1272
130B1208
MG11BC22