Common Menu Fields
Run/Stop field
Print All
The Print All option prints not only what is displayed on the screen, but data
that is below the screen. This option is only available when an ASCII form of
the screen is possible. For example, Print All is never available in Waveform.
When you select Print All with a Listing menu, make sure the first line you
wish to print is in the state location box (data row field) at the center of the
listing area. Lines above this box will not print.
Print Partial
The Print Partial option is identical to the Print All option, except the start
and end states are specified. The screen settings and specified data are
printed in ASCII form.
Run/Stop field
The Run field starts the analyzer measurement. When you select Run, the
screen switches to the display menu last viewed and displays the acquired
data. If Stop is selected during a single run, the data acquisition is aborted. If
Stop is selected during a repetitive run, the current run cycle is completed
before data is displayed.
Repetitive
The Repetitive option runs the data acquisition cycle repeatedly until you
select Stop or until a pre-assigned stop measurement condition is met. The
stop measurement condition is set in the Analyzer Listing or Analyzer
Waveform menus when pattern markers are turned on.
7-20