To Save A Screen's Image - HP 1660CS-Series User Manual

To save a screen's image

You can save menus and measurements to disk in one of four different
graphical formats.
Insert a formatted flexible disk in the flexible disk drive.
1
Set up the menu whose image you want to capture, or run a
2
measurement from which you want to save data.
Select Print and choose Print Disk from the pop-up menu.
3
If the screen contains a pop-up menu, the Print field is not available. Pop-up
menus cannot be saved to file unless you are using a controller.
Select the Filename field and specify a file name to save to.
4
Select the Output Format field and choose the output format for the
5
graphics file from the pop-up menu.
Choose one of the following formats:
•
B/W TIF is a black-and-white TIFF (Tagged Image File Format), v 5.0.
•
GRAY TIF is a grayscale TIFF file in TIFF version 5.0 format.
•
PCX is a grayscale PCX file (PCX is the PC Paintbrush and Publisher's
Paintbrush format from ZSoft).
•
EPS is a black-and-white Encapsulated PostScript™ file.
Select Flexible Disk from the Output Disk menu, then select Execute.
6
Print Disk menu
6-8
File Management
To save a screen's image