Probing - HP 1660CS-Series User Manual

Probing

This section discusses the probing system for the logic analyzer. It
also contains the information you need for connecting the probe
system components to each other, to the logic analyzer and
oscilloscope, and to the system under test.
Probing Options
You can connect the logic analyzer to your system under test in one of
the following ways:
•
Microprocessor- and bus-specific interfaces (optional).
•
Standard general-purpose probing (provided).
•
Direct connection to a 20-pin, 3M-Series type header connector
using the optional termination adapter.
Accessories for HP Logic Analyzers for additional information about
See Also
the microprocessor interface kits and for any new probing solutions.
7-5