Connecting Peripherals To Connect A Mouse - HP 1660CS-Series User Manual

To connect a mouse
Hewlett-Packard supplies a mouse with the logic analyzer. If you prefer a
different style of mouse you can use any PS2 mouse with a standard PS2 DIN
interface.
Plug the mouse into the mouse connector on the back panel. Make
1
sure the plug shows the arrow on top.
To verify connection, check the System External I/O menu for a
2
mouse box.
The mouse box is on the right side above the Settings fields. If the logic
analyzer was displaying the System External I/O menu when you plugged in
the mouse, the menu won't update until you exit and then return to it.
The mouse pointer looks like a plus sign (
pointer over it and press the left button. To duplicate the front-panel knob,
hold down the right button while moving the mouse. Moving the mouse up or
to the right duplicates turning the knob clockwise. Moving the mouse down
or to the left duplicates turning the knob counterclockwise.
System External I/O menu showing mouse installed
Connecting Peripherals
To connect a mouse
+
). To select a field, move the
2-3