HP 1660CS-Series User Manual page 332

Select one of the Scope PV tests.
16
You can run all of the tests at one time by selecting All Tests, or you can run
each test individually. For this example, select Data Memory Test.
In the Data Memory Test menu, select Run, then select Single. The
17
test runs one time, then the screen shows the results. When the test
is finished, select Done.
To run a test continuously, select Repetitive. Select Stop to halt a Repetitive
Run.
To exit the tests, press the System key. Select the field to the right of
15
the Sys PV field.
Select the Exit Test System.
16
If you are performing the self-tests as part of the troubleshooting flowchart,
return to the flowchart.
Troubleshooting
To run the self-tests
12-21